• head_banner_01

Clout Nails With Overlarge Head, Especially for Roofing Felt


Clout nails, also known as shingle nails or felt nails, are commonly used to fix soft materials such as plasterboard and roofing felt. Featured with short nail shank and large flat head, roofing felt nails distribute the load directly underneath the top of the nail. For different construction needs, the nail shanks are available in smooth shanks, ring shanks and screw shanks.

Clout nails provide  greater holding power during construction, are mainly suitable for fastening soft or porous materials, including many joineries, construction and roofing industry.

Product Detail

Product Tags


•Material: carbon steel, stainless steel
• Length: 1" – 3".
• Head: large round flat hat.
• Head diameter: 0.55" – 0.79".
• Shank type: smooth shank, ring shank, screw shank.
• Point: diamond
• Surface treatment: bright polished, electro galvanized, hot dipped galvanized or Mechanical galvanized.
• Package
• 25 kg/carton in bulk, or on pallet.
• 1kg/plastic bag, then in carton.
• 5kg/tub, or 10kg/tub, then in carton and pallet.

8 clout nails-smooth shank

clout nails-smooth shank

9 clout-nail-ring-shank


10 clout-nail-screw-shank



• Suitable for use with both soft and hard wood.
• Large flat head is flush with the material.
• Twist ring shanks offer excellent withdrawal resistance.
• Various surface coatings for increased durability.
• Can be collated for pneumatic nail gun operation.
• Various nail shank types for different requirements.

5 clout-nail-head


6 clout-nail-full-size


7 clout-nail-collated



• Roofing felt.
• Plastic foams.
• Lightweight boards.
• Wall insulation boards.
• Cedar roofing shingles.
• Pressboard.
• Plastic board.
• Plaster board.
• Timber fence palings.

15 clout nails application

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Twist Nails – Maximum Holding Power, No Pre-Punching Required

      Twist Nails – Maximum Holding Power, No Pre-Pun...

      SPECIFICATION •Material: carbon steel, stainless steel, brass. • Material: Q235, SS304 • Diameter: 0.098" – 0.236". • Length: 1-3/4" – 6". • Head: flat round head, oval head. • Shank type: twist( screw) • Point: diamond. • Surface treatment: zinc coated and bright polished. • Package • 1 kg/plastic bag, 25 bags/ carton. • 25 kg/carton in bulk. • As customers' requirement. twist nails wit...

    • Hog Ring Staples Offer Strong and Long-Lasting Holding

      Hog Ring Staples Offer Strong and Long-Lasting ...

      Specification • Material: carbon steel, aluminum, stainless steel. • Material model: Q235, 304, 316. • Head type: C type, D type, M type. • Diameter: 11–16 gauge. • Open crown: 1/2" – 3/4". • Closed diameter: 1/4" – 3/8". • Point: sharp or blunt. • Surface treatment: bright, electro galvanized. • Package: 50 pcs/strip, 200strips/box, 120 boxes/pallet, hog-ring-staples-c ...

    • Finishing Nails

      Finishing Nails

      Specification Length: 1 inch- 5 inch Nail gauge: from 16.5 gauge to 8 gauge Material: mild steel, low carbon steel wire Finish: without coating bright polished, galvanized, copper plated, bronze, brass plate  (Note: Bright finish will rust if exposed unprotected to weather. While, a coating of zinc, copper, bronze or brass tacks gives extra strength and resistance to corrosion) Produce method: cold forging on special nailing machines. Package:...

    • Concrete Nails With Smooth, Straight Fluted & Twilled Fluted Shanks

      Concrete Nails With Smooth, Straight Fluted �...

      Specification •Material: High carbon steel. •Hardness: > HRC 50°. •Head: round, oval, headless. •Head diameter: 0.051" – 0.472". •Shank type: smooth, straight fluted, twilled fluted. •Shank Diameter: 5–20 gauge. •Length: 0.5" – 10". •Point: diamond or blunt. •Surface treatment: hot dipped galvanized, Electro Galvanized, •Package: 25kg/carton; 1kg/2.5kg/5kg per box; or as customer’s need ...

    • Wood Screws – Seven Head Styles Include Flat, Oval and Round

      Wood Screws – Seven Head Styles Include Flat, O...

      SPECIFICATION • Material: hardened steel, stainless steel, brass. • Material model: Q195, Q215, Q235, SS304, SS316. • Screw No.: #1 – #24. • Head: Phillips flat, frearson flat, slotted flat, slotted oval, Phillips round, slotted round and square flat. • Head diameter: 0.119" – 0.650". • Shank type: threaded. • Shank diameter: 0.060" – 0.372". • Length: 5/8"–5". • Point: diamond • Surface treatment: Bright, Electro galvanized, Hot dipp...

    • Galvanized common nails and bright common nails

      Galvanized common nails and bright common nails

      Specification - Material: High quality low carbon steel Q195  - Finished:  Bright polished, Hot-galvanized /Electro-galvanized, Mechanical      galvanized, Flat head and smooth shank . -  The length: 3 / 8 inch - 7 inch - The diameter: BWG20- BWG4 - It is used in construction and other industry field. Comon Nails-bright polished Common Nails mechanical...